HP920XL ink cartridge refill explanation – PART B

by admin on December 28, 2011

PART B – Secondary explanation to refill an HP920XL (HP920, HP564) cartridge. I have tried so many other methods that I saw on the web and that I received from the manufacturer – I think they were all wrong. Have a watch of my video and let me know if it works out for you. I’m pretty sure this is the best solution. The 920XL cartridge is for the HP7000 A3 printer. If my advice helps you like nothing else you’ve tried before, then consider sending me a small donation for the time&effort i put into devising this simple solution – Donate via paypal to [email protected] click here to jump securely to paypal: www.paypal.com www.blutack.com You may know it as: – Saunders UHU Tac Removable Adhesive Putty – 3M Scotch Removeable Adhesive Putty – DAP® BLUESTIK™ Reusable Adhesive Putty – Elmer’s-Tack Removable Adhesive Putty (aka Elmer’s Poster Tack) – DUCK Poster Putty – Sticky Putty – Sticky Tack – Velcro Sticky Fix Tak I hope this helps. Regards Paul
Video Rating: 4 / 5

Recent OEM / Toner Cartridge HP, Kodak, Epson & Xerox Printer Searches:

how to reset ink level on kodak esp c310
HP 920 chip fix
refill hp 920 cartridge chip reset
reset hp 122 ink levels
refill hp 920 ink cartridge
hp 920 reset ink level
hp f4580/ light blinking after refill
hp920xl chip reset
hp920xl reset chip
ink level reset hp 920xl

Tagged as: Cartridge, explanation, HP920XL, part, REFILL

{ 8 comments }

psteinb2000 December 28, 2011 at 9:04 AM: no need to reset ink level. after you have refilled with my method the printer will just print normally. after a while of printing the lights will stops flashing.
psteinb2000 December 28, 2011 at 9:58 AM: no need to reset ink level. it will just print normally. after a while of printing the lights will stops flashing.
Kingdomeunltd December 28, 2011 at 10:51 AM: All lights are on on the panel indicating that ink levels are low plus the dianostic printout shows the levels are low.
rpm2683 December 28, 2011 at 11:03 AM: NICE… HELP ME TO RESET INK LEVEL OF HP920 …
almzhz December 28, 2011 at 11:42 AM: Thank you Paul!
psteinb2000 December 28, 2011 at 12:10 PM: @almzhz
BLUTACK
You may know it as:
- Saunders UHU Tac Removable Adhesive Putty
- 3M Scotch Removeable Adhesive Putty
- DAP BLUESTIK Reusable Adhesive Putty
- Elmer’s-Tack Removable Adhesive Putty (aka Elmer’s Poster Tack)
- DUCK Poster Putty
- Sticky Putty
- Sticky Tack
- Velcro Sticky Fix Tak
I hope this helps.
Regards
Paul
almzhz December 28, 2011 at 12:32 PM: what did you seal the drilled hole with???
psteinb2000 December 28, 2011 at 1:18 PM: @refillmaster
i’ve looked at that method and it looks difficult and complex. my method is simple. you just have to ensure that you seal the drilled hole properly – not a big deal.